Verified Tech Jobs & Hiring Companies, Updated Every 24 Hours

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. MANAGER, ASIC DESIGN ENGINEERING (STARSHIELD) Starshield leverages SpaceX’s Starlink technology and launch capability to support national security efforts. While Starlink is designed for consumer and commercial use, Starshield is designed for government use, with an initial focus on earth observation, communications, and hosted payloads. The Manager, ASIC Design Engineering will lead a team that develops ASICs and FPGAs for cutting edge satellites systems that deliver unprecedented quantities of data at unheard of speeds to the service-members who defend our Nation and Allies. From initial design through on-orbit operations this lead is responsible for leading a phenomenal team of engineers in a collaborative effort to design, manufacture, test and operate chips for satellites that make our Nation safer. RESPONSIBILITIES: Lead a small team responsible for the digital design of ASICs and/or FPGAs for Starshield projects. Lead architectural trades for features, performance requirements and system limitations. Derive specifications for the subsystems and circuits, and work with modem/DSP and RFIC engineers to partition functions between hardware and software domains. Define micro-architecture, implement the RTL in Verilog/System Verilog, integrate that in top level and deliver the fully verified, synthesis/timing clean design. Work closely with verification team to ensure all aspects of the design are covered and verified. Work with leaders across the engineering organization to drive product requirements to push the performance envelope for Starshield satellites. Recruit, develop, train, and retain world class team members who will deliver for our Nation and amplify the team. Provide timing constraints for those IPs and support the physical implementation team (synthesis, timing closure, formality check). Participate in silicon bring-up and validation. Assist in the development of automated test lab equipment for lab measurements. BASIC QUALIFICATIONS: Bachelor’s degree in electrical engineering, computer engineering, computer science, or another engineering discipline. 5+ years of experience in RTL implementation and/or FPGA/ASIC development. 2+ years of experience with direct report management or mentoring an engineering team. PREFERRED SKILLS AND EXPERIENCE: Experience solving problems including clock domain crossings and power optimization. Experience developing complex ASICs. Experience with multicore CPU subsystem design. Experience with standard bus protocols (e.g. AXI, AHB, etc.). Experience with embedded processors. Experience with high speed and low power design techniques. Scripting skills (Python, TCL etc.). Experience with EDA tools such as HDL simulators (e.g. VCS, Questa, IES), HDL Lint tools (e.g. Spyglass) and FPGA tools (e.g. Xilinx Vivado, Altera Quartus II). Ability to work in a dynamic environment with changing needs and requirements. Team-player, can-do attitude and ability to work well in a group environment while still contributing on an individual basis. Enjoy being challenged and learning new skills. ADDITIONAL REQUIREMENTS: Ability to work long hours and weekends as necessary to support critical milestones. Willingness to travel for off-site testing. An active TS-SCI clearance may provide the opportunity for you to work on sensitive SpaceX missions; if so, you will be subject to pre-employment drug and random drug and alcohol testing. COMPENSATION AND BENEFITS: Pay range: Manager: $190,000.00 - $245,000.00/per year Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Those with an active clearance will receive a 10% differential, up to an additional $20,000 annually, once officially briefed into a classified program. Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Employees accrue paid sick leave pursuant to Company policy which satisfies or exceeds the accrual, carryover, and use requirements of the law. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here . SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com .

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. MANAGER, PRINTED CIRCUIT BOARD PRODUCTION (STARLINK) SpaceX is developing a low-latency, broadband internet system to meet the needs of people around the world. Enabled by a constellation of low Earth orbit satellites, Starlink provides fast, reliable internet to populations with little or no connectivity, including those in rural communities and places where existing services are too expensive or unreliable. To enable our goal of “Connecting the Unconnected,” SpaceX is ramping up production in our printed circuit board manufacturing facility in Bastrop, Texas (Greater Austin), which is the largest printed circuit board production facility in North America. We are looking for a well-rounded leader who is passionate about disciplined operations and capable of taking charge of a broad array of responsibilities required to build a world-class operations team. You will be responsible for growing the production team that will operate and maintain this equipment, establishing the standards by which this team operates, and shepherding the program thru the ramp phase into a disciplined production organization. This individual must have the capability to rapidly become a subject matter expert on multiple complex production operations, and capable of operating successfully within a dynamic startup environment while identifying and executing actions needed to ensure mission success. RESPONSIBILITIES: Manage a large team of supervisors, technicians, and associates on a multi-shift schedule Ensure a strong focus is placed on safety and maintain an excellent safety record Build talent pipeline: Recruit, onboard, and develop leaders and ICs Create training/onboarding programs and career development paths to boost quality, reduce lead time/cost Define and enforce operational standards with strict accountability Collaborate with engineering to startup & optimize PCB equipment & processes Drive continuous improvement via metrics (yield, OEE, throughput) Ensure root causes for quality issues are identified and appropriate improvement actions are put in place to prevent recurrence Report area status/risks to leadership and foster cross-department collaboration BASIC QUALIFICATIONS: Bachelor’s degree in an engineering or STEM discipline; OR 4+ years of professional leadership experience in a manufacturing environment 3+ years of production operations or process development experience 2+ years of experience in a leadership position PREFERRED SKILLS AND EXPERIENCE: Bachelor’s degree in an engineering or technical discipline Experience building out a multidisciplinary production organization Experience leading multi-level production operations teams with 50+ members Experience standing up a new production line and bringing it to rate Experience with PCB manufacturing processes including copper electroplating, chemical etching, solder mask application, PCB layup and lamination, laser and mechanical drilling, and/or electrical test in a production setting Experience in related fields such as wafer fabrication, silicon packaging, SMT, battery or chemical manufacturing Experience with applying lean manufacturing principles Ability to adapt to constantly changing work environment ADDITIONAL REQUIREMENTS: Must be willing to work extended hours and weekends as needed Must be able to lift 25 lbs. unassisted. Able to travel up to 10% on an ongoing basis ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here . SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com .

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. MANUFACTURING SUPERVISOR - NIGHT SHIFT (PCB MANUFACTURING) SpaceX is leveraging our experience building rockets and spacecraft to deploy Starlink, the world’s largest satellite constellation and most advanced broadband internet system. We provide reliable and fast internet to millions of users worldwide, including populations with little or no connectivity, rural communities, aircraft, watercraft, and places where existing services are unreliable, too expensive, or disconnected by natural disasters. We design, build, test, and operate all parts of the system, thousands of satellites and consumer antennae that allow users to connect within minutes of unboxing. The Starlink team is seeking out the best-in-class professionals to maximize Starlink’s potential for communities and businesses around the globe. As a supervisor on the Starlink production team, you will spearhead the production of millions of consumer-facing electronic devices that we ship to customers’ homes around the world. You will manage large teams of technicians and assemblers while working closely with manufacturing and design engineers, ultimately driving the transition from prototyping to full-scale production. RESPONSIBILITIES: Coordinate and steer the collective efforts of electronics production associates Enforce area standards and run rules (includes bi-annual reviews and disciplinary action) Interface with area leadership and prioritize work based on production schedule and organizational goals Schedule risk identification and mitigation Coordinate support organization efforts to minimize production interruptions Ensure product quality and conformance to specifications Process non-conforming hardware to efficiently return them to conforming state and normal product flow Improve area safety and efficiency through regular auditing and continuous improvement Optimize product flow through the factory Perform root cause analysis and implement corresponding corrective action plans Identify and eliminate defects within the area value stream Reduce downtime for product and personnel Support efforts to transition product from engineering development to full rate production Review drawings and technical data packages for manufacturability while providing constructive feedback to engineering/design community BASIC QUALIFICATIONS: Bachelor’s degree or 5+ years of professional experience in a manufacturing, production, or logistics environment in lieu of degree 1+ years of experience directly leading a team or project PREFERRED SKILLS AND EXPERIENCE: 7+ years of professional experience in a manufacturing, production, or logistics environment 2+ years of experience leading a team or project Lean manufacturing training and experience Experience monitoring, tracking, and continually improving total cost equation Experience with applying lean manufacturing principles and efficiency methods Demonstrated ability to read, interpret controlled documentation and processes such as: cable harnesses, wiring diagrams, layout drawings, mechanical drawings, GD&T, assembly procedures/work instructions, schematics, engineering drawings, and parts lists Familiarity with Design for Manufacturability, Kaizen, Lean Manufacturing, Six Sigma, and Failure Mode Effects Analysis Experience with PCB manufacturing processes including copper electroplating, chemical etching, water treatment, automated laser and mechanical drilling, PCB layup and lamination and/or plasma etching systems in a production setting Experience preferred in fast-paced consumer electronics production environment Six Sigma certification Able to adapt to constant changing work assignments and fast-paced work environment Proficient with computers, the ability to use MS Office, shop floor management software (ERP) and related programs ADDITIONAL REQUIREMENTS: Must be available for one of the following shifts (start and end times are approximate): C Shift – 5:00pm-5:00am, Sunday-Wednesday D Shift – 5:00pm-5:00am, Wednesday-Saturday Ability to work extended hours and weekends as needed Able to travel for business trips up to 10% on an ongoing basis Ability to lift 25 lbs. unassisted Ability stoop, bend, crawl, and being able to maneuver in tight spaces Must be willing to work onsite, remote work not considered ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here . SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com .

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. MANUFACTURING SUPERVISOR (PCB MANUFACTURING) SpaceX is leveraging our experience building rockets and spacecraft to deploy Starlink, the world’s largest satellite constellation and most advanced broadband internet system. We provide reliable and fast internet to millions of users worldwide, including populations with little or no connectivity, rural communities, aircraft, watercraft, and places where existing services are unreliable, too expensive, or disconnected by natural disasters. We design, build, test, and operate all parts of the system, thousands of satellites and consumer antennae that allow users to connect within minutes of unboxing. The Starlink team is seeking out the best-in-class professionals to maximize Starlink’s potential for communities and businesses around the globe. As a supervisor on the Starlink production team, you will spearhead the production of millions of consumer-facing electronic devices that we ship to customers’ homes around the world. You will manage large teams of technicians and assemblers while working closely with manufacturing and design engineers, ultimately driving the transition from prototyping to full-scale production. RESPONSIBILITIES: Coordinate and steer the collective efforts of electronics production associates Enforce area standards and run rules (includes bi-annual reviews and disciplinary action) Interface with area leadership and prioritize work based on production schedule and organizational goals Schedule risk identification and mitigation Coordinate support organization efforts to minimize production interruptions Ensure product quality and conformance to specifications Process non-conforming hardware to efficiently return them to conforming state and normal product flow Improve area safety and efficiency through regular auditing and continuous improvement Optimize product flow through the factory Perform root cause analysis and implement corresponding corrective action plans Identify and eliminate defects within the area value stream Reduce downtime for product and personnel Support efforts to transition product from engineering development to full rate production Review drawings and technical data packages for manufacturability while providing constructive feedback to engineering/design community BASIC QUALIFICATIONS: Bachelor’s degree or 5+ years of professional experience in a manufacturing, production, or logistics environment in lieu of degree 1+ years of experience directly leading a team or project PREFERRED SKILLS AND EXPERIENCE: 7+ years of professional experience in a manufacturing, production, or logistics environment 2+ years of experience leading a team or project Lean manufacturing training and experience Experience monitoring, tracking, and continually improving total cost equation Experience with applying lean manufacturing principles and efficiency methods Demonstrated ability to read, interpret controlled documentation and processes such as: cable harnesses, wiring diagrams, layout drawings, mechanical drawings, GD&T, assembly procedures/work instructions, schematics, engineering drawings, and parts lists Familiarity with Design for Manufacturability, Kaizen, Lean Manufacturing, Six Sigma, and Failure Mode Effects Analysis Experience with PCB manufacturing processes including copper electroplating, chemical etching, water treatment, automated laser and mechanical drilling, PCB layup and lamination and/or plasma etching systems in a production setting Experience preferred in fast-paced consumer electronics production environment Six Sigma certification Able to adapt to constant changing work assignments and fast-paced work environment Proficient with computers, the ability to use MS Office, shop floor management software (ERP) and related programs ADDITIONAL REQUIREMENTS: Must be available for one of the following shifts (start and end times are approximate): A Shift – 5:00am-5:00pm, Sunday-Wednesday B Shift – 5:00am-5:00pm, Wednesday-Saturday C Shift – 5:00pm-5:00am, Sunday-Wednesday D Shift – 5:00pm-5:00am, Wednesday-Saturday Ability to work extended hours and weekends as needed Able to travel for business trips up to 10% on an ongoing basis Ability to lift 25 lbs. unassisted Ability stoop, bend, crawl, and being able to maneuver in tight spaces Must be willing to work onsite, remote work not considered ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here . SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com .

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. MECHANICAL DESIGN ENGINEER, PCB (STARLINK) SpaceX is leveraging our experience building rockets and spacecraft to deploy Starlink, the world’s largest satellite constellation and most advanced broadband internet system. We provide reliable and fast internet to millions of users worldwide, including populations with little or no connectivity, rural communities, aircraft, watercraft, and places where existing services are unreliable, too expensive, or disconnected by natural disasters. We design, build, test, and operate all parts of the system, thousands of satellites and consumer antennae that allow users to connect within minutes of unboxing. The Starlink team is seeking out the best-in-class professionals to maximize Starlink’s potential for communities and businesses around the globe. As a Mechanical Design Engineer on Starlink, you will own high impact projects that enable mass production of printed circuit boards. You will design custom tooling and machinery for production processes that range from manual to highly automated. You will own various projects from initial design to installation and mass production. Your work will form the backbone for millions of next generation consumer-facing devices that we ship directly to customers and businesses all over the world. From private homes, RVs, planes, or boats, this team plays an instrumental role in leveling the playing field for high-speed connectivity. RESPONSIBILITIES: Design and develop structures, mechanisms, and automation equipment to enable high volume production of printed circuit boards. Demonstrate extreme ownership of projects through their lifecycle, from initial concept generation through fabrication and production bring-up Solve complex, open-ended problems with an emphasis on speed and execution and efficiency Understand Design of Manufacturability and Assembly specific to PCBs, including panelization, fiducials, keep-out zones, and component placement constraints. Develop project plans, budgets, and cost/benefit analysis of implementation of new processes or machines Organize project coordination with internal SpaceX resources and external vendors to maintain project timelines and budgets BASIC QUALIFICATIONS: Bachelor's degree in an engineering discipline 1+ years of experience designing mechanical systems using 3D CAD software, FEA, and 2D drawing. PREFERRED SKILLS AND EXPERIENCE: Prior work experience with structural design and analysis Experience with custom machine design, electromechanical systems, motors, actuators, linear rails, bearings, end of arm tooling design, lifting/rigging, etc. Strong expertise in design for manufacturability and design for assembly including experience taking products from development to high-volume production. Understanding of drafting standards and the application of GD&T Experience with Siemens Unigraphics (UGS/NX) and Teamcenter CAD/PDM Systems Experience with manufacturing process development, facility and line layouts, process failure mode effects analysis, and error proofing Understanding of PCB fabrication and assembly processes Experience with mechanical fixturing and automation for high volume PCB lines ADDITIONAL REQUIREMENTS Willingness to travel to other SpaceX sites and/or vendors for potentially extended periods of time including international Ability to lift 25 lbs. unassisted Lifting, standing, climbing, bending, grasping, sitting, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position Willing to work onsite; remote work is not considered ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here . SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com .

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. MECHANICAL ENGINEER, PCB (STARLINK) SpaceX is leveraging our experience building rockets and spacecraft to deploy Starlink, the world’s largest satellite constellation and most advanced broadband internet system. We provide reliable and fast internet to millions of users worldwide, including populations with little or no connectivity, rural communities, aircraft, watercraft, and places where existing services are unreliable, too expensive, or disconnected by natural disasters. We design, build, test, and operate all parts of the system, thousands of satellites and consumer antennae that allow users to connect within minutes of unboxing. The Starlink team is seeking out the best-in-class professionals to maximize Starlink’s potential for communities and businesses around the globe. As a Mechanical Engineer on Starlink, you will spearhead state-of-the-art production processes for our printed circuit boards (PCBs). This position is responsible for the development and implementation of all equipment, facilities, tooling, and manufacturing process technologies necessary to scale production to high volumes. You will design and implement advanced manufacturing processes and automation, owning your projects from conception and factory design through machine installation, commissioning, factory ramp, and process optimization. You will design and run large, hands-on process Design of Experiments (DOE), optimize complex mechanical and chemical process equipment, and interact regularly with senior leadership during critical design phases. By the end of this year, the Starlink factory in Bastrop will be the largest PCB manufacturing facility, by volume, in North America. Your work will form the backbone for millions of next generation consumer-facing devices that we ship directly to customers and businesses all over the world. From private homes, RVs, planes, or boats, this team plays an instrumental role in leveling the playing field for high-speed connectivity. RESPONSIBILITIES: Develop, implement, and maintain new and/or improved manufacturing processes, equipment, technologies, and facilities; examples could include laser and mechanical Computer Numerical Control (CNC) drilling machines, advanced inductive lamination machines, plasma etching chambers, screen printing and inkjet printing adhesives, automation cells, copper etching and plating lines, etc. Analyze production processes and machinery from a first principles, physics-based approach Lead Design of Experiments (DOE) to establish a stable and robust process that can be handed off to production personnel; perform defect characterization and analysis to determine root cause and develop action plans to improve yields Develop project plans, budgets, and cost/benefit analysis for implementation of new processes or machines Own and perform machine activation and testing with a small team of engineers and technicians Solve technical and emergent issues from manufacturing (part quality, machine reliability, process instability, etc.) BASIC QUALIFICATIONS: Bachelor's degree in engineering discipline 1+ years of experience with fluids, mechanical, electromechanical design, and/or analysis (internship or project team experience is applicable) PREFERRED SKILLS AND EXPERIENCE: Master’s degree in engineering or a related technical discipline 2+ years hands-on project experience with complex fluid or mechanical based production systems in a professional setting, preferably as a lead 3+ years of professional experience in design and analysis Experience with taking products from research and development into production. Experience with PCB manufacturing processes like metal plating, chemical etching, CNC drill equipment, lamination presses, cleanroom equipment, etc. ADDITIONAL REQUIREMENTS Must be willing to work the following hours: 2nd shift: M-F 5pm-5am Willingness to travel to other SpaceX sites and/or vendors for potentially extended periods of time including international Ability to lift 25 lbs. unassisted Lifting, standing, climbing, bending, grasping, sitting, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position Willing to work onsite; remote work is not considered ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here . SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com .

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. APPLICATION SOFTWARE ENGINEER The application software team is the central nervous system of SpaceX – we create mission critical applications that are used throughout SpaceX to accelerate launch vehicle production and flight as well as systems that allow Starlink to grow into a worldwide fast, reliable Internet service. We are looking for engineers who treat fellow teammates with fairness, respect, and support. Our team is currently creating and evolving systems to enable rapid build and reuse of Starship as well as designing the next generation manufacturing software that will be used in high throughput factories for Starlink. Other applications range from platforms that support concurrent streams of data from many always-on assets to manage the world’s largest satellite constellation to public facing systems where customers can join our Starlink network globally. We work closely with engineers throughout the company to create and update our systems with respect to crewed launches, Starship flights, changes to the Starlink network and much more. Aerospace experience is not required to be successful here - rather we look for smart, motivated, respectful, collaborative engineers who love solving problems and want to make an impact on a super inspiring mission. You will have full ownership of challenging problems, working with a team of enthusiastic engineers with diverse perspectives to design and produce solutions that enable SpaceX to move towards our goals at a rapid pace. The success of the missions at SpaceX depends on the software that you and your team produce. RESPONSIBILITIES: Develop highly reliable software solutions that are used across SpaceX Create new applications that improve how SpaceX operates Build prototypes to prove out key design concepts and quantify technical constraints Own all aspects of software engineering and product development Deep dive into your users’ problems to find and create efficient solutions Bring your voice to the table in team collaborations on architecture, design, and code reviews BASIC QUALIFICATIONS: Bachelor's degree in computer science, engineering, math, or scientific discipline; OR 2+ years of professional experience building software in lieu of a degree Experience in full stack development PREFERRED SKILLS AND EXPERIENCE: Programming experience in Python, C#.NET, Go, Scala, Java, or similar object-oriented language 1+ years of rigorous experience building single page web applications Experience with version control, continuous integration, and continuous delivery concepts Expertise in designing software systems Deep understanding of testing, continuous integration, build, deployment & monitoring Expertise in profiling and improving application performance Experience with build systems (Make, Bazel/Pants/Buck, Gradle) and package management tools (pip, npm) Experience with UNIX-like operating systems and tools like Terraform, Ansible, Puppet for managing them Experience working with in-stream data processing using Apache Kafka, RabbitMQ, ActiveMQ, or similar technologies Production experience with Docker and Kubernetes Front-end experience in Angular, React, or similar JavaScript framework Database experience with PostgreSQL, SQL Server, or similar database technologies ADDITIONAL REQUIREMENTS: Must be willing to work extended hours and weekends as needed This role requires you to be onsite. Remote and/or hybrid work will not be considered ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here . SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com .

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. AI ENGINEER, SPECIAL PROGRAMS - TOP SECRET CLEARANCE AI engineers work directly with our end customers to own strategy, execution, and deployment of mission-critical AI solutions for U.S federal agencies. You'll work closely with product, research, infrastructure, and legal/governance teams to deliver high-stakes projects to make current and future models maximally useful for missions while upholding safety, transparency, and ethical standards. RESPONSIBILITIES: Design, build, and optimize integrations between AI frontier models (e.g., Grok family) and government systems, platforms, and data environments. Identify pain points, scoping product specifications, and designing and building AI-powered software for government or enterprise use cases. Benchmark models and develop evaluation frameworks to assess performance and address weaknesses, ensuring compliance with customer standards. Enhancing model performance through system prompt tuning or fine-tuning, with an eye toward secure and scalable deployment. Analyze request logs, prompt data, or system outputs to ensure reliability and audibility. Build internal tooling to streamline workflows and automate repetitive tasks in secure environments. Partner with agency stakeholders to understand requirements, prototype solutions, and iterate rapidly based on real-world feedback. Ship production-grade code and features with a bias toward speed, simplicity, and measurable impact. BASIC QUALIFICATIONS: Bachelor's degree in computer science, mathematics, computer engineering, physics, or data science. 1+ years of hands-on software engineering experience building scalable systems, APIs, or AI/ML applications. Active Top-Secret or Top-Secret SCI. PREFERRED SKILLS AND EXPERIENCE: Demonstrated success working with government agencies, DoW, or federal contractors on AI, software, or data projects. 6+ years of software engineering experience, ideally in environments requiring high reliability or security. Expertise in designing, implementing, and maintaining robust, scalable, and secure AI-driven solutions that meet stringent compliance and operational standards. Proven experience implementing AI or machine learning products with APIs, back-end systems, and front-end interfaces. Proficiency in Python and/or TypeScript. Strong understanding of the HTTP protocol and secure API design. Robust engineering background, preferably in fields such as Computer Science, Mathematics, Software Engineering, Physics, or Data Science. Experience building evaluation frameworks for AI systems and assessing capabilities in regulated or high-stakes contexts. Deep understanding of machine learning fundamentals—model evaluation, training, and fine-tuning—with a focus on production-ready deployments. History of deploying machine learning models to production, ideally in secure or cloud-based government environments. Expertise in writing developer documentation or maintaining SDKs for technical audiences, including government developers. Ability to work with massive datasets, optimize system performance, and scale solutions for high-throughput, mission-critical workloads. Familiarity with infrastructure-as-code tools like Pulumi or Terraform, particularly in secure or government-aligned deployments. Adaptability to shifting priorities and requirements in a fast-paced, mission-driven startup setting. Excellent verbal and written communication skills in English, with experience documenting technical solutions for diverse stakeholders. Active Top-Secret or Top-Secret SCI with a full scope polygraph. ADDITIONAL REQUIREMENTS: Must be willing to work extended hours and weekends as needed. 20% travel may be required to government sites. COMPENSATION AND BENEFITS: Pay range: AI Engineer: $135,000 - $230,000.00/per year Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Employees accrue paid sick leave pursuant to Company policy which satisfies or exceeds the accrual, carryover, and use requirements of the law. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here . SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com .