Verified Tech Jobs & Hiring Companies, Updated Every 24 Hours

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. MANAGER, ASIC DESIGN ENGINEERING (STARSHIELD) Starshield leverages SpaceX’s Starlink technology and launch capability to support national security efforts. While Starlink is designed for consumer and commercial use, Starshield is designed for government use, with an initial focus on earth observation, communications, and hosted payloads. The Manager, ASIC Design Engineering will lead a team that develops ASICs and FPGAs for cutting edge satellites systems that deliver unprecedented quantities of data at unheard of speeds to the service-members who defend our Nation and Allies. From initial design through on-orbit operations this lead is responsible for leading a phenomenal team of engineers in a collaborative effort to design, manufacture, test and operate chips for satellites that make our Nation safer. RESPONSIBILITIES: Lead a small team responsible for the digital design of ASICs and/or FPGAs for Starshield projects. Lead architectural trades for features, performance requirements and system limitations. Derive specifications for the subsystems and circuits, and work with modem/DSP and RFIC engineers to partition functions between hardware and software domains. Define micro-architecture, implement the RTL in Verilog/System Verilog, integrate that in top level and deliver the fully verified, synthesis/timing clean design. Work closely with verification team to ensure all aspects of the design are covered and verified. Work with leaders across the engineering organization to drive product requirements to push the performance envelope for Starshield satellites. Recruit, develop, train, and retain world class team members who will deliver for our Nation and amplify the team. Provide timing constraints for those IPs and support the physical implementation team (synthesis, timing closure, formality check). Participate in silicon bring-up and validation. Assist in the development of automated test lab equipment for lab measurements. BASIC QUALIFICATIONS: Bachelor’s degree in electrical engineering, computer engineering, computer science, or another engineering discipline. 5+ years of experience in RTL implementation and/or FPGA/ASIC development. 2+ years of experience with direct report management or mentoring an engineering team. PREFERRED SKILLS AND EXPERIENCE: Experience solving problems including clock domain crossings and power optimization. Experience developing complex ASICs. Experience with multicore CPU subsystem design. Experience with standard bus protocols (e.g. AXI, AHB, etc.). Experience with embedded processors. Experience with high speed and low power design techniques. Scripting skills (Python, TCL etc.). Experience with EDA tools such as HDL simulators (e.g. VCS, Questa, IES), HDL Lint tools (e.g. Spyglass) and FPGA tools (e.g. Xilinx Vivado, Altera Quartus II). Ability to work in a dynamic environment with changing needs and requirements. Team-player, can-do attitude and ability to work well in a group environment while still contributing on an individual basis. Enjoy being challenged and learning new skills. ADDITIONAL REQUIREMENTS: Ability to work long hours and weekends as necessary to support critical milestones. Willingness to travel for off-site testing. An active TS-SCI clearance may provide the opportunity for you to work on sensitive SpaceX missions; if so, you will be subject to pre-employment drug and random drug and alcohol testing. COMPENSATION AND BENEFITS: Pay range: Manager: $190,000.00 - $245,000.00/per year Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Those with an active clearance will receive a 10% differential, up to an additional $20,000 annually, once officially briefed into a classified program. Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Employees accrue paid sick leave pursuant to Company policy which satisfies or exceeds the accrual, carryover, and use requirements of the law. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here . SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com .

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. MANAGER, PRINTED CIRCUIT BOARD PRODUCTION (STARLINK) SpaceX is developing a low-latency, broadband internet system to meet the needs of people around the world. Enabled by a constellation of low Earth orbit satellites, Starlink provides fast, reliable internet to populations with little or no connectivity, including those in rural communities and places where existing services are too expensive or unreliable. To enable our goal of “Connecting the Unconnected,” SpaceX is ramping up production in our printed circuit board manufacturing facility in Bastrop, Texas (Greater Austin), which is the largest printed circuit board production facility in North America. We are looking for a well-rounded leader who is passionate about disciplined operations and capable of taking charge of a broad array of responsibilities required to build a world-class operations team. You will be responsible for growing the production team that will operate and maintain this equipment, establishing the standards by which this team operates, and shepherding the program thru the ramp phase into a disciplined production organization. This individual must have the capability to rapidly become a subject matter expert on multiple complex production operations, and capable of operating successfully within a dynamic startup environment while identifying and executing actions needed to ensure mission success. RESPONSIBILITIES: Manage a large team of supervisors, technicians, and associates on a multi-shift schedule Ensure a strong focus is placed on safety and maintain an excellent safety record Build talent pipeline: Recruit, onboard, and develop leaders and ICs Create training/onboarding programs and career development paths to boost quality, reduce lead time/cost Define and enforce operational standards with strict accountability Collaborate with engineering to startup & optimize PCB equipment & processes Drive continuous improvement via metrics (yield, OEE, throughput) Ensure root causes for quality issues are identified and appropriate improvement actions are put in place to prevent recurrence Report area status/risks to leadership and foster cross-department collaboration BASIC QUALIFICATIONS: Bachelor’s degree in an engineering or STEM discipline; OR 4+ years of professional leadership experience in a manufacturing environment 3+ years of production operations or process development experience 2+ years of experience in a leadership position PREFERRED SKILLS AND EXPERIENCE: Bachelor’s degree in an engineering or technical discipline Experience building out a multidisciplinary production organization Experience leading multi-level production operations teams with 50+ members Experience standing up a new production line and bringing it to rate Experience with PCB manufacturing processes including copper electroplating, chemical etching, solder mask application, PCB layup and lamination, laser and mechanical drilling, and/or electrical test in a production setting Experience in related fields such as wafer fabrication, silicon packaging, SMT, battery or chemical manufacturing Experience with applying lean manufacturing principles Ability to adapt to constantly changing work environment ADDITIONAL REQUIREMENTS: Must be willing to work extended hours and weekends as needed Must be able to lift 25 lbs. unassisted. Able to travel up to 10% on an ongoing basis ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here . SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com .

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. MANUFACTURING SUPERVISOR - NIGHT SHIFT (PCB MANUFACTURING) SpaceX is leveraging our experience building rockets and spacecraft to deploy Starlink, the world’s largest satellite constellation and most advanced broadband internet system. We provide reliable and fast internet to millions of users worldwide, including populations with little or no connectivity, rural communities, aircraft, watercraft, and places where existing services are unreliable, too expensive, or disconnected by natural disasters. We design, build, test, and operate all parts of the system, thousands of satellites and consumer antennae that allow users to connect within minutes of unboxing. The Starlink team is seeking out the best-in-class professionals to maximize Starlink’s potential for communities and businesses around the globe. As a supervisor on the Starlink production team, you will spearhead the production of millions of consumer-facing electronic devices that we ship to customers’ homes around the world. You will manage large teams of technicians and assemblers while working closely with manufacturing and design engineers, ultimately driving the transition from prototyping to full-scale production. RESPONSIBILITIES: Coordinate and steer the collective efforts of electronics production associates Enforce area standards and run rules (includes bi-annual reviews and disciplinary action) Interface with area leadership and prioritize work based on production schedule and organizational goals Schedule risk identification and mitigation Coordinate support organization efforts to minimize production interruptions Ensure product quality and conformance to specifications Process non-conforming hardware to efficiently return them to conforming state and normal product flow Improve area safety and efficiency through regular auditing and continuous improvement Optimize product flow through the factory Perform root cause analysis and implement corresponding corrective action plans Identify and eliminate defects within the area value stream Reduce downtime for product and personnel Support efforts to transition product from engineering development to full rate production Review drawings and technical data packages for manufacturability while providing constructive feedback to engineering/design community BASIC QUALIFICATIONS: Bachelor’s degree or 5+ years of professional experience in a manufacturing, production, or logistics environment in lieu of degree 1+ years of experience directly leading a team or project PREFERRED SKILLS AND EXPERIENCE: 7+ years of professional experience in a manufacturing, production, or logistics environment 2+ years of experience leading a team or project Lean manufacturing training and experience Experience monitoring, tracking, and continually improving total cost equation Experience with applying lean manufacturing principles and efficiency methods Demonstrated ability to read, interpret controlled documentation and processes such as: cable harnesses, wiring diagrams, layout drawings, mechanical drawings, GD&T, assembly procedures/work instructions, schematics, engineering drawings, and parts lists Familiarity with Design for Manufacturability, Kaizen, Lean Manufacturing, Six Sigma, and Failure Mode Effects Analysis Experience with PCB manufacturing processes including copper electroplating, chemical etching, water treatment, automated laser and mechanical drilling, PCB layup and lamination and/or plasma etching systems in a production setting Experience preferred in fast-paced consumer electronics production environment Six Sigma certification Able to adapt to constant changing work assignments and fast-paced work environment Proficient with computers, the ability to use MS Office, shop floor management software (ERP) and related programs ADDITIONAL REQUIREMENTS: Must be available for one of the following shifts (start and end times are approximate): C Shift – 5:00pm-5:00am, Sunday-Wednesday D Shift – 5:00pm-5:00am, Wednesday-Saturday Ability to work extended hours and weekends as needed Able to travel for business trips up to 10% on an ongoing basis Ability to lift 25 lbs. unassisted Ability stoop, bend, crawl, and being able to maneuver in tight spaces Must be willing to work onsite, remote work not considered ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here . SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com .

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. MANUFACTURING SUPERVISOR (PCB MANUFACTURING) SpaceX is leveraging our experience building rockets and spacecraft to deploy Starlink, the world’s largest satellite constellation and most advanced broadband internet system. We provide reliable and fast internet to millions of users worldwide, including populations with little or no connectivity, rural communities, aircraft, watercraft, and places where existing services are unreliable, too expensive, or disconnected by natural disasters. We design, build, test, and operate all parts of the system, thousands of satellites and consumer antennae that allow users to connect within minutes of unboxing. The Starlink team is seeking out the best-in-class professionals to maximize Starlink’s potential for communities and businesses around the globe. As a supervisor on the Starlink production team, you will spearhead the production of millions of consumer-facing electronic devices that we ship to customers’ homes around the world. You will manage large teams of technicians and assemblers while working closely with manufacturing and design engineers, ultimately driving the transition from prototyping to full-scale production. RESPONSIBILITIES: Coordinate and steer the collective efforts of electronics production associates Enforce area standards and run rules (includes bi-annual reviews and disciplinary action) Interface with area leadership and prioritize work based on production schedule and organizational goals Schedule risk identification and mitigation Coordinate support organization efforts to minimize production interruptions Ensure product quality and conformance to specifications Process non-conforming hardware to efficiently return them to conforming state and normal product flow Improve area safety and efficiency through regular auditing and continuous improvement Optimize product flow through the factory Perform root cause analysis and implement corresponding corrective action plans Identify and eliminate defects within the area value stream Reduce downtime for product and personnel Support efforts to transition product from engineering development to full rate production Review drawings and technical data packages for manufacturability while providing constructive feedback to engineering/design community BASIC QUALIFICATIONS: Bachelor’s degree or 5+ years of professional experience in a manufacturing, production, or logistics environment in lieu of degree 1+ years of experience directly leading a team or project PREFERRED SKILLS AND EXPERIENCE: 7+ years of professional experience in a manufacturing, production, or logistics environment 2+ years of experience leading a team or project Lean manufacturing training and experience Experience monitoring, tracking, and continually improving total cost equation Experience with applying lean manufacturing principles and efficiency methods Demonstrated ability to read, interpret controlled documentation and processes such as: cable harnesses, wiring diagrams, layout drawings, mechanical drawings, GD&T, assembly procedures/work instructions, schematics, engineering drawings, and parts lists Familiarity with Design for Manufacturability, Kaizen, Lean Manufacturing, Six Sigma, and Failure Mode Effects Analysis Experience with PCB manufacturing processes including copper electroplating, chemical etching, water treatment, automated laser and mechanical drilling, PCB layup and lamination and/or plasma etching systems in a production setting Experience preferred in fast-paced consumer electronics production environment Six Sigma certification Able to adapt to constant changing work assignments and fast-paced work environment Proficient with computers, the ability to use MS Office, shop floor management software (ERP) and related programs ADDITIONAL REQUIREMENTS: Must be available for one of the following shifts (start and end times are approximate): A Shift – 5:00am-5:00pm, Sunday-Wednesday B Shift – 5:00am-5:00pm, Wednesday-Saturday C Shift – 5:00pm-5:00am, Sunday-Wednesday D Shift – 5:00pm-5:00am, Wednesday-Saturday Ability to work extended hours and weekends as needed Able to travel for business trips up to 10% on an ongoing basis Ability to lift 25 lbs. unassisted Ability stoop, bend, crawl, and being able to maneuver in tight spaces Must be willing to work onsite, remote work not considered ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here . SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com .

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. MECHANICAL DESIGN ENGINEER, PCB (STARLINK) SpaceX is leveraging our experience building rockets and spacecraft to deploy Starlink, the world’s largest satellite constellation and most advanced broadband internet system. We provide reliable and fast internet to millions of users worldwide, including populations with little or no connectivity, rural communities, aircraft, watercraft, and places where existing services are unreliable, too expensive, or disconnected by natural disasters. We design, build, test, and operate all parts of the system, thousands of satellites and consumer antennae that allow users to connect within minutes of unboxing. The Starlink team is seeking out the best-in-class professionals to maximize Starlink’s potential for communities and businesses around the globe. As a Mechanical Design Engineer on Starlink, you will own high impact projects that enable mass production of printed circuit boards. You will design custom tooling and machinery for production processes that range from manual to highly automated. You will own various projects from initial design to installation and mass production. Your work will form the backbone for millions of next generation consumer-facing devices that we ship directly to customers and businesses all over the world. From private homes, RVs, planes, or boats, this team plays an instrumental role in leveling the playing field for high-speed connectivity. RESPONSIBILITIES: Design and develop structures, mechanisms, and automation equipment to enable high volume production of printed circuit boards. Demonstrate extreme ownership of projects through their lifecycle, from initial concept generation through fabrication and production bring-up Solve complex, open-ended problems with an emphasis on speed and execution and efficiency Understand Design of Manufacturability and Assembly specific to PCBs, including panelization, fiducials, keep-out zones, and component placement constraints. Develop project plans, budgets, and cost/benefit analysis of implementation of new processes or machines Organize project coordination with internal SpaceX resources and external vendors to maintain project timelines and budgets BASIC QUALIFICATIONS: Bachelor's degree in an engineering discipline 1+ years of experience designing mechanical systems using 3D CAD software, FEA, and 2D drawing. PREFERRED SKILLS AND EXPERIENCE: Prior work experience with structural design and analysis Experience with custom machine design, electromechanical systems, motors, actuators, linear rails, bearings, end of arm tooling design, lifting/rigging, etc. Strong expertise in design for manufacturability and design for assembly including experience taking products from development to high-volume production. Understanding of drafting standards and the application of GD&T Experience with Siemens Unigraphics (UGS/NX) and Teamcenter CAD/PDM Systems Experience with manufacturing process development, facility and line layouts, process failure mode effects analysis, and error proofing Understanding of PCB fabrication and assembly processes Experience with mechanical fixturing and automation for high volume PCB lines ADDITIONAL REQUIREMENTS Willingness to travel to other SpaceX sites and/or vendors for potentially extended periods of time including international Ability to lift 25 lbs. unassisted Lifting, standing, climbing, bending, grasping, sitting, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position Willing to work onsite; remote work is not considered ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here . SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com .

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. MECHANICAL ENGINEER, PCB (STARLINK) SpaceX is leveraging our experience building rockets and spacecraft to deploy Starlink, the world’s largest satellite constellation and most advanced broadband internet system. We provide reliable and fast internet to millions of users worldwide, including populations with little or no connectivity, rural communities, aircraft, watercraft, and places where existing services are unreliable, too expensive, or disconnected by natural disasters. We design, build, test, and operate all parts of the system, thousands of satellites and consumer antennae that allow users to connect within minutes of unboxing. The Starlink team is seeking out the best-in-class professionals to maximize Starlink’s potential for communities and businesses around the globe. As a Mechanical Engineer on Starlink, you will spearhead state-of-the-art production processes for our printed circuit boards (PCBs). This position is responsible for the development and implementation of all equipment, facilities, tooling, and manufacturing process technologies necessary to scale production to high volumes. You will design and implement advanced manufacturing processes and automation, owning your projects from conception and factory design through machine installation, commissioning, factory ramp, and process optimization. You will design and run large, hands-on process Design of Experiments (DOE), optimize complex mechanical and chemical process equipment, and interact regularly with senior leadership during critical design phases. By the end of this year, the Starlink factory in Bastrop will be the largest PCB manufacturing facility, by volume, in North America. Your work will form the backbone for millions of next generation consumer-facing devices that we ship directly to customers and businesses all over the world. From private homes, RVs, planes, or boats, this team plays an instrumental role in leveling the playing field for high-speed connectivity. RESPONSIBILITIES: Develop, implement, and maintain new and/or improved manufacturing processes, equipment, technologies, and facilities; examples could include laser and mechanical Computer Numerical Control (CNC) drilling machines, advanced inductive lamination machines, plasma etching chambers, screen printing and inkjet printing adhesives, automation cells, copper etching and plating lines, etc. Analyze production processes and machinery from a first principles, physics-based approach Lead Design of Experiments (DOE) to establish a stable and robust process that can be handed off to production personnel; perform defect characterization and analysis to determine root cause and develop action plans to improve yields Develop project plans, budgets, and cost/benefit analysis for implementation of new processes or machines Own and perform machine activation and testing with a small team of engineers and technicians Solve technical and emergent issues from manufacturing (part quality, machine reliability, process instability, etc.) BASIC QUALIFICATIONS: Bachelor's degree in engineering discipline 1+ years of experience with fluids, mechanical, electromechanical design, and/or analysis (internship or project team experience is applicable) PREFERRED SKILLS AND EXPERIENCE: Master’s degree in engineering or a related technical discipline 2+ years hands-on project experience with complex fluid or mechanical based production systems in a professional setting, preferably as a lead 3+ years of professional experience in design and analysis Experience with taking products from research and development into production. Experience with PCB manufacturing processes like metal plating, chemical etching, CNC drill equipment, lamination presses, cleanroom equipment, etc. ADDITIONAL REQUIREMENTS Must be willing to work the following hours: 2nd shift: M-F 5pm-5am Willingness to travel to other SpaceX sites and/or vendors for potentially extended periods of time including international Ability to lift 25 lbs. unassisted Lifting, standing, climbing, bending, grasping, sitting, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position Willing to work onsite; remote work is not considered ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here . SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com .

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. MECHANICAL SPECIALIST (STARLINK PCB) At SpaceX we’re leveraging our experience in building rockets and spacecraft to deploy Starlink, the world’s most advanced broadband internet system. Starlink is the world’s largest satellite constellation and is providing fast, reliable internet to millions of users worldwide. We design, build, test, and operate all parts of the system – thousands of satellites, consumer receivers that allow users to connect within minutes of unboxing, and the software that brings it all together. We’ve only begun to scratch the surface of Starlink’s potential global impact and are looking for best-in-class specialists to help maximize Starlink’s utility for communities and businesses around the world. The success of Starlink depends on the quality, reliability, cost, manufacturability, throughput, and security of the products that you deliver. If you seek a fast-paced, dynamic environment; if you thrive on solving difficult problems where resolutions have high impact; and if you love the challenge of building something from scratch, then this role will be an ideal next career step. We are looking for talented manufacturing specialists to help establish new manufacturing and test processes and support full-scale production for the user terminal (a high-volume manufactured product that consumers will have in their homes). RESPONSIBILITIES: Execute new product introduction builds across all work centers Program, load, and operate automated equipment Triage non-conforming products and drive resolution and preventative actions Resolve production issues while ensuring design integrity, product quality, and delivery timelines Perform process development and validation on new models in extremely aggressive timelines Ensure the successful transition of products from development to volume production Identify continuous improvement opportunities for yield, performance, and cost Define maintenance schedules and support activities BASIC QUALIFICATIONS: Bachelor’s degree in an engineering, math or science discipline; OR high school diploma or equivalency certificate and 3+ years of professional experience in a hands-on manufacturing environment in lieu of a degree PREFERRED SKILLS AND EXPERIENCE: Associate or bachelor's degree in an engineering, math, or science discipline Experience producing J-STD-001 Class 2, IPC-A-610 Class 2 or equivalent hardware Experience programming, loading, and operating the following automated equipment: paste printer, solder paste inspection (SPI), pick and place, reflow oven, automated optical inspection (AOI), X-ray inspection, adhesive/coating dispenser, BGA rework Experience with electrical tests, in circuit and/or bed of nails testing Ability to deliver high-quality hardware in a fast-paced NPI environment Ability to adapt and process change quickly Excellent computer skills (email, Microsoft Windows, ERP/MRP/MES systems, iOS, executing custom-developed software) Excellent communication (written and verbal) and teamwork skills Ability to provide process and design improvement suggestions to engineering ADDITIONAL REQUIREMENTS: Must be willing to begin work training on 1st shift (5:00 AM–5:00 PM) for initial 30 days Must be willing to work one of the following schedules upon completion of training (B and D shift preferred): A-Shift: 5:00 AM - 5:00 PM (Sunday - Tuesday and every other Wednesday) B-Shift: 5:00 AM - 5:00 PM (Thursday - Saturday and every other Wednesday) C-Shift: 5:00 PM - 5:00 AM (Sunday - Tuesday and every other Wednesday) D-Shift: 5:00 PM - 5:00 AM (Thursday - Saturday and every other Wednesday) Able to work all shifts and available for overtime and weekends as needed Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position Able to lift up to 25lbs. unassisted Willing to travel to other SpaceX sites and/or vendors for potentially extended periods of time including international ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here . SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com .

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. AI ENGINEER, PLATFORM INFRASTRUCTURE, SPECIAL PROGRAMS As an AI Engineer, Platform Infrastructure you will build the tooling, and work with our cleared engineers at classified sites execute it. The quality of what you build directly determines how effectively those engineers can operate in environments where they cannot call you for help. Your tooling must be deterministic, complete, well-tested, and foolproof. RESPONSIBILITIES: Design and build the deployment generator. Create and maintain platform documentation. Build the bundle pipeline. Implement profile-driven rendering for public cloud, enterprise on-prem, and classified air-gap targets based on profile selection. Build and maintain the cross-profile CI matrix. Build the testing and validation framework. Integrate with the existing Supercompute team's operators, Helm charts, and CRDs by consuming their work as inputs to the generator without modifying production infrastructure. Own the monitoring stack migration. BASIC QUALIFICATIONS: Bachelor's degree in computer science, mathematics, computer engineering, physics, data science, or engineering discipline. 1+ years of experience in Go Lang and/or Python. 1+ years of experience working with Kubernetes or similar tooling for automating, developing and scaling containerized applications. PREFERRED SKILLS AND EXPERIENCE: Ability to obtain and maintain a Top Secret or Top Secret SCI clearance. Experience building CI/CD pipelines and deployment automation (Buildkite, GitHub Actions, or equivalent). Familiarity with container image management. Experience with Infrastructure-as-Code (Pulumi or Terraform) and understanding of state management tradeoffs. Understanding of Linux systems. Experience building air-gapped or disconnected deployment tooling where all dependencies must be pre-staged. Familiarity with GPU infrastructure, including NVIDIA drivers, CUDA, NCCL, InfiniBand/RoCE networking. Experience with PXE boot, cloud-init, squashfs, or other bare metal provisioning technologies. Own the bare metal provisioning pipeline. ADDITIONAL REQUIREMENTS: Must be willing to work extended hours and weekends as needed. 20% travel may be required to government sites. This position requires successfully obtaining and maintaining a Top Secret Security Clearance as a condition of employment. While the clearance may not be immediately necessary upon hire, we encourage you to initiate the application process promptly upon accepting this offer. Your ability to secure the necessary clearance is essential for fulfilling key responsibilities of the role. Should you be unable to obtain it, SpaceX reserves the right to modify or terminate your employment to align with operational needs. COMPENSATION AND BENEFITS: Pay range: AI Engineer: $135,000 - $230,000/per year Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Employees accrue paid sick leave pursuant to Company policy which satisfies or exceeds the accrual, carryover, and use requirements of the law. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here . SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com .